No
  • Home
  • Blog
  • One sheet (4' X 8') plywood dog house

One sheet (4' X 8') plywood dog house

Measurements are for ½" plywood. Exterior grade is recommended. Nailing strips should be used for reinforcing the contact points. When using ¾" material nailing strips are not necessary, however, note that the floor should then measure

33 ½" in length. When nailing together - the sides overlap the bottom, front and back panels. The front and back panels also overlap the bottom. By nailing blocks to the inside of the roof it can simply sit on top of the house without sliding and be conveniently lifted off when cleaning out the house. The box should be painted and placed on blocks of 2 by 4's to keep it off the ground.

*Make sure the dog's line is long enough to allow jumping up onto the roof.